Arduino MKR RGB Shield
You can use this shield to show values from your board and is controllable from the Arduino IoT cloud. No need of solder, or special adapters, just plug the RGB matrix shield on top of your favourite MKR board and you are ready to go!
The mounted LED’s are very dense and bright, with full RGB colours!
Specification
LEDs | 84 RGB APA102 |
Input Volatge | 5V |
Operating Voltage | 3.3V |
Maximum Current | 2.5A |
Communication | SPI |
Length | 61.5 mm |
Width | 27 mm |
Weight | 32 gr. |
Documentation
The Arduino MKR RGB Sheld is open-source hardware! You can build your own board using the following files: