Arduino MKR Vidor 4000

Categories: Arduino®, Microcontrollers

Description

Arduino MKR Vidor 4000

With the MKR VIDOR 4000 you can configure it the way you want; you can essentially create your own controller board. It comes loaded with hardware and potential: an 8 MB SRAM; a 2 MB QSPI Flash chip — 1 MB allocated for user applications; a Micro HDMI connector; an MIPI camera connector; and Wifi & BLE powered by U-BLOX NINA W10 Series. It also includes the classic MKR interface on which all pins are driven both by SAMD21 and FPGA. Plus, it has a Mini PCI Express connector with up to 25 user programmable pins.

The FPGA contains 16K Logic Elements, 504 KB of embedded RAM, and 56 18×18 bit HW multipliers for high-speed DSP. Each pin can toggle at over 150 MHz and can be configured for functions such as UARTs, (Q)SPI, high resolution/high frequency PWM, quadrature encoder, I2C, I2S, Sigma Delta DAC, etc.

The on-board FPGA can be also used for high-speed DSP operations for audio and video processing. This board also features a Microchip SAMD21. Communication between FPGA and the SAMD21 is seamless.

Specifications:

FPGA	Intel Cyclone 10CL016
	Mini PCI Express port with programmable pins
Camera connector	MIPI camera connector
Circuit Operating Voltage	3.3V
Digital I/O Pins	22 headers + 25 Mini PCI Express
PWM Pins	All Pins
UART	Up to 7 (depends on FPGA configuration)
SPI	Up to 7 (depends on FPGA configuration)
I2C	Up to 7 (depends on FPGA configuration)
Analog Input Pins	n/a
Analog Output Pins	n/a
External Interrupts	n/a
DC Current per I/O Pin	4 or 8 mA
Flash Memory	2 MB
SDRAM	8 MB
EEPROM	n/a
Clock Speed	48 MHz – up to 200 MHz
Video Output	Micro HDMI

Microcontroller	Microchip ATSAMD21 (Arm Cortex-M0+ processor)
Wi-Fi	U-blox Nina-W102
(VIN)	5V
Supported Battery(*)	Li-Po Single Cell, 3.7V, 700mAh Minimum
Circuit Operating Voltage	3.3V
Digital I/O Pins	22
PWM Pins	12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 – or 18 -, A4 -or 19)
UART	1
SPI	1
I2C	1
Analog Input Pins	7 (ADC 8/10/12 bit)
Analog Output Pins	1 (DAC 10 bit)
External Interrupts	8 (0, 1, 4, 5, 6, 7, 8, A1 -or 16-, A2 – or 17)
Flash Memory	256 KB
SRAM	32 KB
EEPROM	No
Clock Speed	32.768 kHz (RTC), 48 MHz
LED_BUILTIN	6
Full-Speed USB Device and Embedded Host	Included
LED_BUILTIN	6
Length	83 mm
Width	25 mm
Weight	32 g