Arduino Nano Every
Based on the ATMega4809 AVR processor, the Arduino Nano Every is flexible to the requirements of your design. It can be used in a breadboard when mounting pin headers, or as a SMT directly soldered on a PCB thanks to its castellated pads. An SAMD11 ARM Cortex M0+ processor acts as a high performance USB to serial converter that can be re-programmed by skilled users to expand further the applications of this board.
Specifications:
This board is based on the ATMega4809 microcontroller.
Clock | 20MHz |
Flash | 48KB |
SRAM | 6KB |
EEPROM | 256byte |
A ATSAMD11D14A Processor takes care of the USB to SERIAL communication and it is connected to the following pins of the ATMega4809 microcontroller.
ATMega4809 Pin | ATMega4809 Acronym | SAMD11 Pin | SAMD11 Acronym | Description |
9 | PB05 | 15 | PA22 | SAMD11 TX -> ATMega4809 RX |
8 | PB04 | 16 | PA23 | ATMega4809 TX -> SAMD11 RX |
41 | UPDI | 12
11 |
PA15
PA14 |
UPDI RX
UPDI TX |
The board has a two 15 pins connectors – one on each side -, pin to pin compatible with the original Arduino Nano.
Pin | Funcion | Type | Description |
1 | D13 | Digital | SPI SCK, GPIO |
2 | +3V3 | Power Out | Internally generated power output to external devices |
3 | AREF | Analog | Analog Reference; can be used as GPIO |
4 | A0/DAC0 | Analog | ADC in/DAC out; can be used as GPIO |
5 | A1 | Analog | ADC in; can be used as GPIO |
6 | A2 | Analog | ADC in; can be used as GPIO |
7 | A3 | Analog | ADC in; can be used as GPIO |
8 | A4/SDA | Analog | ADC in; I2C SDA; Can be used as GPIO |
9 | A5/SCL | Analog | ADC in; I2C SCL; Can be used as GPIO |
10 | A6 | Analog | ADC in; can be used as GPIO |
11 | A7 | Analog | ADC in; can be used as GPIO |
12 | +5V | Power Out | Internally generated power output to external devices |
13 | RST | Digital In | Active low reset input (duplicate of pin 18) |
14 | GND | Power | Power Ground |
15 | VIN | Power In | Vin Power input |
16 | TX | Digital | USART TX; can be used as GPIO |
17 | RX | Digital | USART RX; can be used as GPIO |
18 | RST | Digital | Active low reset input (duplicate of pin 13) |
19 | GND | Power | Power Ground |
20 | D2 | Digital | GPIO |
21 | D3/PWM | Digital | GPIO; can be used as PWM |
22 | D4 | Digital | GPIO |
23 | D5/PWM | Digital | GPIO; can be used as PWM |
24 | D6/PWM | Digital | GPIO; can be used as PWM |
25 | D7 | Digital | GPIO |
26 | D8 | Digital | GPIO |
27 | D9/PWM | Digital | GPIO; can be used as PWM |
28 | D10/PWM | Digital | GPIO; can be used as PWM |
29 | D11/MOSI | Digital | SPI MOSI; can be used as GPIO |
30 | D12/MISO | Digital | SPI MISO; can be used as GPIO |