Atlas Scientific Dissolved Oxygen Kit
This Atlas Scientific Dissolved Oxygen Kit comes with necessary components to quickly take accurate readings of dissolved oxygen using your existing micro-controller such as an Arduino or Raspberry Pi.
The Dissolved Oxygen circuit returns data in Mg/L up to two significant figures. Readings can be taken either dependent or independently of temperature or conductivity.
Note: The probe can be submerge indefinitely in fresh or salt water up to the BNC connector.
• 1 EZO™ Dissolved Oxygen Circuit
• 1 Dissolved Oxygen Probe
• 1 125ml (4oz) 0 Dissolved Oxygen calibration solution
(used to confirm that the D.O. is working properly)
• 1 Pre-Assembled Female BNC connector
• 1 Basic EZO™ Inline Voltage Isolator (optional: + Php 1400.00)
Probe Max Pressure: 3,447 kPa (500PSI)
Probe Max Depth: 343 meters (1,125 ft)
Probe Weight: 51 grams
Female BNC Spec
Thread Size 1/4″ – 36 UNS Thread type