DC Gear Motor 12V 95RPM – SGM37-550
This High Power DC Gear Motor 12V 95RPM – SGM37-550 is intended to run at 12V but can be driven with lower voltage up to 6V at the expense of power. To control the speed and direction of the motor you will need a motor driver, this particular model SGM37-550 will require a lot of current to operate, we recommend a high power motor driver such as VNH2SP30.
Check out our DC motor bracket, you might need it.
Note: Popular Motor driver such as L298, and TB6612FNG are not sufficient for this motor.
Warning: Stalling or overloading gear motors can greatly decrease their lifetimes and even result in immediate damage.
Spur Gear vs. Planetary Gear
The two most common setup of DC motor gearbox are spur and planetary. Spur type gearbox are simpler, less expensive, and work best for low torque applications. Torque capacity of spur type gearbox is limited because each gear in the train bears different load. Planetary gearboxes, in contrast, share equal load over multiple gears, making them more durable for high torque application.
- Gearbox: Spur Gear
- Nominal voltage: 12V
- No Load Speed: 95 RPM
- No Load Current: 0.8 A
- Load Speed: 83 RPM
- Load Torque: 53 kg.cm
- Load Output: 50W
- Load Current: 3A
- Stall Torque: n/a (will result in immediate failure when stalled)
- Stall Current: 20 A
- Reducer Ratio: 1:168
- Reducer Size: 26.5mm
- Weight: 360g