SG92R SG90 Micro 9g Servo Nylon Carbon fiber Gears for RC Model Aero modelling Helicopter Parts

This tiny Digital Micro servo 9g SG92R  can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you’re used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. Of course, its not nearly as strong as the standard size. Works great with the Motor Shield for Arduino or by just wiring up with the library. Comes with a few horns and hardware.

To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE (see here for an example sketch). Position “0” (1.5ms pulse) is middle, “90” (~2ms pulse) is all the way to the right, “-90” (~1ms pulse) is all the way to the left.

Technical Details Digital Micro servo 9g SG92R :

• Manufacturer: TowerPro
• Size : 23x11x29 mm
• Voltage : 3V to 6V DC
• Weight: 9g / 0.32oz
• Speed : 0.12 sec/60 (at 4.8V)
• Torque : 1.6 kg-cm
• Working Temp : -30C~60C
• Teflon Bushing, 19cm wire, coreless motor, servo-arms & screw included

SG90

Specifications:

• Item Name: SG90 Mini Analog Servo
• Operating Speed : 0.12-0.13 sec/60 degree（4.8V）
• Stall torque: 1.2kg / 42.3oz(4.8V);1.5 kg / 56.4oz (6.0V)
• operating voltage: 4.8-6.0V
• Temperature range: -30℃~60℃
• Dead band width: 5us
• Item size: 2.6 x 2.2 x 1.2cm Item weight: about 9g
• Connector wire length: 24.5cm