Hurakan BIQU Bigtreetech 3D Printer

Biqu Hurakan runs Klipper firmware out of the box. This means it can do things like input shaping to reduce 3D printing artifacts and give you cleaner-looking 3D prints.

This hardware, which can be found within the Biqu Hurakan, has the necessary capabilities to run Klipper while keeping the machine competitively priced.

Features:

– The Biqu Hurakan has a build volume of 220 x 220 x 270 mm.

– A maximum hot end temperature of 260 °C and a maximum bed temperature of 100 °C, alongside a Bowden extruder, should get you printing with the usual suspect materials, such as PLA, ABS, PETG, and TPU. – The first Cartesian 3D printers that runs Klipper firmware out of the box.

– Acceleration speeds of 3000 mm/s and print speeds of up to 150 mm/s with minimal artifacts – Inside the Hurakan, you’ll find a Manta M4P 32-bit board based around a 64MHz ARM STM32H0B0RE, plus a CB1 4 core Cortex-A53@1.5GHz with 512M DDR3 memory.

– The Hurakan features Wi-Fi and 100 Mbps Ethernet connectivity, plus dual female USB-A ports to connect a USB camera, USB flash drive, or any other USB device compatible with the system.

– Operate and calibrate the Hurakan via its built-in LCD display.

– Hurakan includes a Biqu MicroProbe; similar to a BLTouch bed leveling probe, but super-light (6 g) and just about a third of the length of a standard ABL probe. This should help you get first layers down consistently and provide a smooth printing experience.

– To save power consumption, the heated bed can be configured via a switch. When set to 100 W, only the middle zone of the bed will heat, which is ideal for smaller models. When set to 240 W, the entire bed will heat.

– Filament runout detection: A sensor to detect if the filament has run out is a standard feature and nice to have for prints that run for many hours. Tensioners on X and Y belts: To get good dimensional accuracy, you can easily tweak belt tension using the included tensioners, instead of doing any mechanical rework to the machine.

 

Tech Specs:

GENERAL SPECIFICATIONS

Technology: Fused deposition modeling (FDM)

Year: 2022

Assembly: Partially assembled

Mechanical arrangement: Cartesian-XZ-head

Manufacturer: Biqu 3D

 

PRINTER PROPERTIES

Build volume: 220 x 220 x 270 mm

Feeder system: Bowden

Print head: Single nozzle

Nozzle size: 0.4 mm

Max. hot end temperature: 260 °C

Max. heated bed temperature: 100 °C

Print bed material: NA Frame: Aluminum

Bed leveling: Automatic Display: Yes

Connectivity: Wi-Fi, Ethernet, USB

Print recovery: No Filament sensor: Yes

Camera: No

 

MATERIALS

Filament diameter: 1.75 mm

Third-party filament: Yes

Filament materials: Consumer materials (PLA, ABS, PETG, Flexibles)

 

SOFTWARE Recommended slicer: Cura, Simplify3D, Repetier-Host

Operating system: Windows, Mac OSX, Linux

File types: STL, OBJ, AMF