Plastic Water Solenoid Valve 12V – 1/2″ NPS

This Solenoid Valve has 1/2″ NPS, it is normally closed until 12VDC is applied. The valve has a gasket arrangement inside, so there is a minimum pressure requirement of 0.02 Mpa (3 PSI). Also note that liquid can only flow in one direction. To use this in conjunction with an Arduino or other micro-controller, we recommend using a transistor or a relay to drive the solenoid valve.

Tutorial:

• Instructables – Controlling a Solenoid Valve with an Arduino

Specifications

• 1/2″ Nominal NPS
• Working Pressure: 0.02 Mpa – 0.8 Mpa
• Working Temperature: 1 ℃ – 75 ℃
• Voltage: 6VDC to 12VDC