SIM5320E 3G Module GSM GPRS GPS Development Board for Arduino 51 STM32 AVR MCU w/ GPS Antennas 3m

Product details of SIM5320E 3G Module GSM GPRS GPS Development Board for Arduino 51 STM32 AVR MCU

DESCRIPTION

The SIM5320E is a GSM / GPRS / GPS module. You can send / receive a message, make / receive a call and transfer data - basically all the necessary functions for a basic phone. There are two sets of antenna interface on this GSM module, one for GPS and the other for GSM / GPRS.

The GSM module supports quad-band 850MHz GSM, 900MHz EGSM, 1800MHz DCS, 1900MHz PCS and dual-band UMTS / HSDPA 900 / 2100MHz WCDMA + HSDPA frequencies. You can connect onto any global GSM network with any 2G / 3G SIM card. It has a fully-integrated GPS (Qualcomm PM8015 GPS) that can be controlled and queried over the same serial port.

Make / receive calls easily by using a headset or an external 8Ω speaker + electret microphone. Send / receive data via TCP / IP, HTTP, HTTPS, FTP. AT command interface can be used with 300, 600, 1200, 4800, 9600, 19200, 38400, 57600, 115200, 230K, 461K, 961K, 3.2M, 3.7M and 4.0Mbps.

Power supply range is from 4.6 - 5.2V. The minimum current required is 1A, anything less than 1A the module will not work properly!

TECHNICAL DETAILS GPS SPECIFICATIONS

• Acquisition Channels: 16
• GPS Code: GPS L1 C/A Code
• Sensitivity: Tracking: -157 dBm, Cold Start: -144 dBm
• Time-To-First Fix: Cold Start: 100s (typ), Hot Start: 1s (typ)
• Accuracy: Approx 2.5m

MODULE SPECIFICATIONS

• Input Voltage: 4.6 - 5.2V
• Minimum Current: 1A
• Default Baud Rate: 115200
• Communication Interface: TTL Signal 2.85 - 5V
• Operating Temperature: -40 to 85°C
• Dimensions: 51 x 42 x 11mm
• Weight: 85g

SHIPPING LIST

• 1 x SIM5320E 3G Module
• 1 x 3G PCB antenna
• 1 x GPS antenna
• 1 x IPX-SMA cable