YIHUA 853AAA+ Multi Functional Preheat Station Soldering Iron Desoldering Hot Air Soldering Station

Features:

1.Adopts PID programmable temperature control technology with an implantable highest-precision PID program for high-speed tracking and detection of actual soldering iron temperature with real-time temperature correction. Miraculous temperature compensation speeds allow for minimal temperature error for temperature stability and compensation speeds.

2.Featuring hot air rework station ,preheating station ,and high power soldering station functions.

3.The hot air and preheating station soldering equipment have programmable functions. For the preheating station ,operating time and operating temperature can be set as parameters ,while for the hot air, operating time ,operating temperature and operating air flow can be set as parameters.

4. Featuring Celsius / Fahrenheit temperature display function Meet different market needs to design the temperature display mode, the temperature display function can be set to display either Celsius or Fahrenheit ,depending on local practices.

5.Features +-80? temperature compensation function. Temperature and display errors caused by environmental effects or replacement of parts including heating core and soldering iron tips can be corrected by using this function.

6.There are three sections of storage function, it can store different parameters ,easy to choose and easy to operate.

7.The product has an operating time function ,enabling users to check the product's operating time.

8.The soldering iron has a ten-minute fixed sleeping function .If the soldering iron is not in use and has been in a stationary state for ten minutes ,the temperature of the soldering iron will be automatically cooled to 200? and the soldering iron shall enter sleep mode ,preventing the oxidization of the soldering iron tip, both extending the lifespan of the soldering iron tip and saving energy.

9.The air has no wind protection function ,if use a heat is not normal in the process of stop the wind ,the heating wire to stop heating ,and the prevention of the no wind burning handle, so as to greatly improve the safety performance of the product.

Data:

Input Voltage: AC 110~127V 60Hz/ 220~240V 50Hz

Max power consumption: 1200W

Preheating Station

• Temperature Range: 50 ~ 400 °C
• Temperature Stability ±2 °C
• Display Type: Blue LED
• Preheat Area: 120*120mm

Hot Air Station

• Airflow type brushless fan spiral out wind
• Air Flow ?120L/min
• Temperature Range 100 ~ 480 °C
• Temperature Stability ±1 °C
• Display Type: Blue LED
• Handle cable length ?100cm

Soldering Iron Station

• Temperature Range 200 ~ 480 °C
• Soldering iron heater: 60W ceramic heater
• Temperature Stability ±1 °C Tip of ground voltage <2mV
• Tip ground impedance <2 ohm
• Display Type: Blue LED
• Handle cable length ?100cm