Esun PLA Matte Dual Filament

Description:

PLA-Matte Dual is an excellent printing material that stands out for its matte surface. This material has a unique two-color design, showing a sense of color layering, making the model textured and clear. Its delicate surface and no obvious layer pattern provide a high-level touch and visual quality for the printed parts. Compared with ABS, PLA-Matte is more convenient to use, the closed cavity is not needed for the printing. It has a lower shrinkage rate,  hard to warping or cracking, making it an ideal choice for printing large-scale models.

Features:

Two-colored filament
Environmentally friendly
High cost efficient
Fast printing
Easy to peel off the support
Excellent printability
Filament is not easy to break
Matte surface

Specifications:

Model: eSun ePLA-Matte Dual
Diameter Format: 1.75mm
Net Weight: 1kg
Printing Temperature: 190-230℃
Bed Temperature: 45-60℃
Density: 1.329 g/cm3
Tensile Strength (Z): 14.31 MPa
Tensile Strength (XY): 25.976 MPa
Elongation at Break (Z): 2.26%
Elongation at Break (XY): 7.23%
Flexural Strength (Z): 21.1 MPa
Flexural Strength (XY): 42.6 MPa
Flexural Modulus (Z): 1782.62 MPa
Flexural Modulus (XY): 2249.05 MPa
IZOD Impact Strength (Z): 2.15 KJ/m²
IZOD Impact Strength (XY): 4.7 KJ/m²
Melt Flow Index (g/10min): 5.8 (190℃/2.16kg)
Heat Distortion Temperature: 51 (℃, 0.45 MPa)
Packaging: Vacuum packed with silica desiccant

PLA

• Safe and low-odor filament, but still print with good ventilation.
• Avoid overheating to prevent smoke or odor. 
• Allow the print to cool down before removing from the bed

Safety Data Sheet

Esun PLA Matte Dual Filament