SKU:MLE04039
13.56mHz PN532 NFC Module for arduino Compatible with raspberry pi NFC card module to read and write
₱340.00
₱340.00
Sale
Sold out
Tax included.
Shipping calculated at checkout.
Or 3 months for only ₱1,000 with 
. Learn More.
. Learn More.
Only 10 units left
Couldn't load pickup availability
About the Product
Product Description
NFC RFID Module PN532
Most of RFID modules are hardwired for SPI communication. This module, however, is not. The PN532 is an NFC RFID module clocked at 13.56MHz. What's special about this is that it has an onboard switch that you can use to easily change between I2C, SPI, and TTL Serial. It also has an integrated logic level shifter so you can use either 3.3V or 5V. Note that this module gets warm in normal operation.
Specifications:
Supports I2C, SPI, and HSU (High-Speed UART), easy to switch between these modes.
Works in the NFC mode and RFID reader/writer mode
The integrated 3.3V voltage regulator provides 3.3V or 5V working voltage for your choice
Maximum distance for communication: 3 cm
Equipped with two 3mm mounting holes, easy to use in your project with its small dimension
View Product Details
NFC RFID Module PN532
Most of RFID modules are hardwired for SPI communication. This module, however, is not. The PN532 is an NFC RFID module clocked at 13.56MHz. What's special about this is that it has an onboard switch that you can use to easily change between I2C, SPI, and TTL Serial. It also has an integrated logic level shifter so you can use either 3.3V or 5V. Note that this module gets warm in normal operation.
Specifications:
Supports I2C, SPI, and HSU (High-Speed UART), easy to switch between these modes.
Works in the NFC mode and RFID reader/writer mode
The integrated 3.3V voltage regulator provides 3.3V or 5V working voltage for your choice
Maximum distance for communication: 3 cm
Equipped with two 3mm mounting holes, easy to use in your project with its small dimension
