Atlas EZO-HUM™ Embedded Humidity Probe – Stainless Steel Body | EZO-HUM-P-S

Description:

From industrial processes to environmental monitoring, this humidity probe can be used in countless applications. Our stainless steel Humidity Probe is versatile and durable; Ideal for both indoor and outdoor humidity monitoring. The EZO Embedded Humidity Probe gives the same readings as our EZO-HUM Circuit. There is no difference in the readings or accuracy, only the design.

This probe comes fully calibrated and ready to use right out of the box.

Specifications:

• Reads: Relative humidity (RH), Dew point, Air temperature
• Range: 0 – 100% RH
• Calibration: Factory calibrated
• Response time:
  • 1 reading per second (UART mode)
  • 1 reading per 300 milliseconds (I2C mode)
• Accuracy: +/- 2% of reading from 5-95% RH
• Body material: 316 stainless steel
• Connector: 5 lead data cable
• Cable length: 1 meter
• Data protocol: UART & I2C
• Default I2C address: 111 (0x6F)
• Data format: ASCII
• Operating voltage: 3.3V − 5V
• IP rating: IP67 (waterproof up to 1 meter)
• NEMA rating: 6P
• Life expectancy: 10 years

Documents & Downloads:

• EZO-HUM™ Stainless Steel Body Probe Datasheet
• Female connector information
• FREE Software - AtlasDesktop Monitoring Software
• AtlasDesktop Monitoring Software Users Guide
• Arduino Uno Sample Code
• Arduino Mega / Giga Sample Code
• Arduino I2C Sample Code
• Raspberry Pi Sample Code (I2C)
• EZO UART Library
• EZO I2C Library
• EZO-HUM™ 3D model (*step)

Part List:

• 1x Embedded Humidity probe with stainless steel body
• 1x data cable with 5 pin male header
• 1x Locknut & O-ring.