







Grove - Infrared Receiver
The Infrared Receiver is used to receive infrared signals and also used for remote control detection. There is a IR detector on the Infrared Receiver which is used to get the infrared light emitted by the Infrared Emitter. The IR detector have a demodulator inside that looks for modulated IR at 38 KHz. The Infrared Receiver can receive signals well within 10 meters. If more than 10 meters , the receiver may not get the signals. We often use the two Twigs-the Infrared Receiver and the Infrared Emitter to work together.
For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.
Technical details
Dimensions | 20mm x20mm x10mm |
Weight | G.W 9g |
Battery | Exclude |
Part List
Infrared Receiver | 1 |
Documents
- IR Send and Receiver Library
- IR Receive Library for LinkIt ONE
- TSOP282 Datasheet
- Infrared Receiver eagle files
These are the types of Grove Cables for other applications.
More information about how to choose a cable, please refer to this manual.