SKU:MLE04273
Makerlab Upgraded Starter Kit for Uno R3 DIP with PDF Manual Lessons Compatible with Arduino
₱1,499.00
₱1,499.00
₱1,499.00
Sale
Sold out
Tax included.
Shipping calculated at checkout.
Or 3 months for only ₱1,000 with 
. Learn More.
. Learn More.
Couldn't load pickup availability
About the Product
With this Advance Upgraded Starter Kit v2, you can learn from basic up to advance micro-controller programming and also the basics of RFID. It includes lots of sensors and other components. Great for project starters, hobbyists and researchers.
Note:
***This Version of the Kit's LCD already has the I2C Adapter.
***The manual for this kit is not included in the package.
***2023 version with added sensors and updated manual.
2023 Kit + Ultrasonic
Package List:
- 1xUNO R3 Board based on Arduino®
- 1xUSB Cable
- 1x (16×2) LCD with I2C Adapter
- 1xRC522 Module
- 1xRFID Card
- 1xKey Chain
- 1xJoystick Module
- 1xKey Board
- 1xRTC Module
- 1xWater Level Sensor
- 1xDHT11 Humidity Sensor
- 1xRGB Module
- 1xULN2003 Motor Driver Module
- 1x28BYJ-48 Stepper Motor
- 1×1-Channel Relay Module
- 1xMB-102 Breadboard
- 65xJumper Wire
- 10xFemale-Male Jumper Cable
- 1xSound Sensor Module
- 1xRemote
- 1x10K Potentiometer
- 1×1 Digital Tube
- 1×4 Digital Tube
- 1xMatrix Tube
- 1xSG90 Micro Servo
- 2xBuzzer
- 2xBall Switches
- 3xPhotoresistance
- 5xTactile Switches with Caps
- 1x9V Battery Clip with DC Jack
- 15x5mm LED
- 30xResistance (220ohm, 1K ohm, 10K ohm)
- 1xFlame Sensor
- 1xIR Receiver Sensor
- 1x74HC595
- 1xLM35DZ
2023 Kit UnoR3 CH340
Package List:
- 1xArduino Uno CH340G
- 1xUSB Cable
- 1x (16×2) LCD with I2C Adapter
- 1xRC522 Module
- 1xRFID Card
- 1xKey Chain
- 1xJoystick Module
- 1xKey Board
- 1xRTC Module
- 1xWater Level Sensor
- 1xDHT11 Humidity Sensor
- 1xRGB Module
- 1xULN2003 Motor Driver Module
- 1x28BYJ-48 Stepper Motor
- 1×1-Channel Relay Module
- 1xMB-102 Breadboard
- 65xJumper Wire
- 10xFemale-Male Jumper Cable
- 1xSound Sensor Module
- 1xRemote
- 1x10K Potentiometer
- 1×1 Digital Tube
- 1×4 Digital Tube
- 1xMatrix Tube
- 1xSG90 Micro Servo
- 2xBuzzer
- 2xBall Switches
- 3xPhotoresistance
- 5xTactile Switches with Caps
- 1x9V Battery Clip with DC Jack
- 15x5mm LED
- 30xResistance (220ohm, 1K ohm, 10K ohm)
- 1xFlame Sensor
- 1xIR Receiver Sensor
- 1x74HC595
- 1xLM35DZ
Note:
You can download the Manual on the provided
The manual for this kit is not included in the package.
This version of the Kit's LCD already has the I2C Adapter.
URL: Arduino Kit Manual
