PRE ORDER ONLY!!
Sermoon D3 Pro vs Sermoon D3:
| Sermoon D3 Pro | Sermoon D3 | |
| Build volume | 290x220x300mm | 300x250x300mm |
| Device size | 553x578x656mm | 553 x 576 x 656mm |
| Weight | 43kg | 45kg |
| Print speed | max. 300 mm/s Standard single ext. 200mm/s Standard dual extr. 150mm/s |
PLA: ≤ 150mm/s ABS: ≤ 250mm/s |
| Filament diameter | 1.75mm | |
| Nozzle type | hardened steel (2 nozzles) |
copper alloy, hardened steel (1 nozzle) |
| Nozzle diameter | 0.4mm | |
| Max. nozzle temperature | ≤ 300℃ | |
| Max. heating bed temperature | 120℃ | ≤ 110℃ |
| Build plate | Flexible build plate | PC and PEI spring steel |
| Extruder | 1 x Dual Gear Direct Drive dual extrusion (2 nozzles) |
1 x Dual Gear Direct Drive single extrusion (1 nozzle) |
| Levelling | Automatic levelling | |
| Screen | 4.3 inch touchscreen | |
| Motherboard | 32-bit silent motherboard | |
| Interfaces | wifi, usb, ethernet |
U disk, wifi, RJ45 cable |
| Power Loss Recovery | Yes | |
| Filament runout | Yes | |
| Pause While Opening Door | Yes | |
| Air purifier | Yes | |
| Camera | Yes | |
| Lightning Kit | Yes | - |
| Nominal voltage | 100-240V 50/60Hz | |
| Rated capacity | 1300W | 500W |
| Slicing formats | STL, OBJ, AMF |
STL, OBJ, 3MF |
| Slicing software | Creality Print 4.3 or newer |
Creality Print, Creality Slicer, Cura Simplify3D |
