Skip to content

Loading....!
  • 20% off

    2 channel pwm pulse frequency

    Features: Two independent PWM generators can set the frequency, duty cycle; The wide frequency range, high accuracy; Can serial communication....

    ₱135.00 ₱169.00
    ₱135.00
    ₱135.00 ₱169.00
  • Rs pro red 6 mm² tri-rated cable, 10 awg, 84/0.3mm, 100m, pvc insulation

    Product Details RS Pro Tri Rated Cable From RS Pro a high quality Tri Rated cable with a 1 m...

    ₱13,500.00
    ₱13,500.00
    ₱13,500.00
  • Rs pro black 1.5 mm² hook up wire, 15 awg, 30/0.25 mm, 100m, pvc insulation

    Product Details 2491X A plain copper stranded conductor covered by a PVC insulated sheath. These flexible wires are intended for...

    ₱6,500.00
    ₱6,500.00
    ₱6,500.00
  • Rs pro self adhesive cable tie mount

    Description: This adhesive cable tie base is designed as an anchor point to attach cables to another surface using a...

    ₱40.00
    ₱40.00
    ₱40.00
  • Creality synchronous belt kit for k1 / k1 max 1800mm | 4001080072

    Compatible: CR-5 Pro H(CT-380)_K1_K1 MaxSynchronous Belt Kit_1.8M

    ₱499.00
    ₱499.00
    ₱499.00
  • Sovol 4010 axial fan (mainboard) for sv08 3d printer

    Description The Sovol 4010 Axial Fan is a cooling fan engineered for the mainboard compartment of the SV08 CoreXY 3D...

    ₱449.00
    ₱449.00
    ₱449.00
  • Creality cr m4 motherboard

    Description: The Creality CR-M4 Motherboard is a custom-designed, integrated 32-bit mainboard developed specifically for the CR-M4 3D printer. It combines...

    ₱4,499.00
    ₱4,499.00
    ₱4,499.00
  • Adafruit cap1188 - 8-key capacitive touch sensor breakout - i2c or spi | 1602

    CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI Add lots of touch sensors to your next microcontroller...

    ₱550.00
    ₱550.00
    ₱550.00
  • Atlas scientific surveyor™ analog orp kit | kit-104o

    Description: The Atlas Scientific Surveyor™ ORP Kit is a low-cost solution for engineers who are looking for a simple monitoring solution...

    ₱12,000.00
    ₱12,000.00
    ₱12,000.00
  • Sparkfun gps breakout – chip antenna, sam-m8q (qwiic) | gps-15210

    SparkFun GPS Breakout - Chip Antenna, SAM-M8Q (Qwiic) Description: The SparkFun SAM-M8Q GPS Breakout is a high quality, GPS board...

    ₱2,500.00
    ₱2,500.00
    ₱2,500.00
  • Pololu g2 high-power motor driver 18v25 | 2994

    Pololu G2 High-Power Motor Driver 18v25 The Pololu G2 high-power motor driver is a discrete MOSFET H-bridge designed to drive...

    ₱2,000.00
    ₱2,000.00
    ₱2,000.00
  • M5stack mini infrared distance unit

    Description: IR Unit is an infrared photodiode unit that integrates both an infrared transmitter and receiver. It is designed to be...

    ₱300.00
    ₱300.00
    ₱300.00
  • M5stack battery module for arduino esp32 core development kit

    Description: BATTERY: The Battery extension module is a 750mAh battery ADD-ON. Would you like to make a demo or prototype...

    ₱550.00
    ₱550.00
    ₱550.00
  • M5stack 1 to 3 hub unit

    Description: HUB is a unit that is used in order to expand the GROVE ports over the M5Stack device. For...

    ₱250.00
    ₱250.00
    ₱250.00
  • M5stack gps module with internal & external antenna

    Description: GPS is build with u-blox M8 NEO-M8N module with an integrated built in active antenna. The NEO-M8 series provides...

    ₱2,500.00
    ₱2,500.00
    ₱2,500.00
  • M5stack watering unit with moisture sensor and pump

    Description: Watering unit is a capacitive soil moisture detection and adjustment unit designed for intelligent plant breeding scenarios. It combines a...

    ₱800.00
    ₱800.00
    ₱800.00
  • Rs485 and can module

    RS485 And CAN Module RS485&CAN Module is an industrial communication module for Raspberry Pi, on board 2*RS485 Bus and 1*CAN...

    ₱1,700.00
    ₱1,700.00
    ₱1,700.00
  • Sparkfun resistor lead bending tool | tol-13114

    Resistor Lead Bending Tool This Resistor Lead Bending Tool sometimes referred to as a "forming" tool provides you with an...

    ₱390.00
    ₱390.00
    ₱390.00
  • Wemos esp-wroom-02 wifi module with 18650 battery holder

    WeMos ESP-WROOM-02 WiFi Module with 18650 Battery Holder WeMos ESP-WROOM-2 module works similarly with NodeMCU boards with with addition of...

    ₱700.00
    ₱700.00
    ₱700.00
  • Pololu g2 high-power motor driver 18v17 2991

    Pololu G2 High-Power Motor Driver 18v17 The Pololu G2 high-power motor driver is a discrete MOSFET H-bridge designed to drive...

    ₱1,500.00
    ₱1,500.00
    ₱1,500.00
  • Okdo camera 5mp module, csi-2 with 2592 x 1944 resolution

    The OKdo 5MP Camera comes with a Fisheye Lens, wider Field View camera module and is designed for the entire...

    ₱1,500.00
    ₱1,500.00
    ₱1,500.00
  • Yihua 938d portable tweezers station

    Description: The 938D hot tweezers utilize a high-power heater, with a special design for easily de-soldering electronic component welding joints...

    ₱2,200.00 ₱2,200.00
    ₱2,200.00
    ₱2,200.00 ₱2,200.00
  • M5stack m5stamp c3 mate with pin header

    Description: M5Stack just added a new family to its popular series of modules with the Stamp-C3. the new Stamp-C3 featuring...

    ₱550.00
    ₱550.00
    ₱550.00
  • Xl6019 15w 3a constant current board

    XL6019 LM2596S 15W 3A Constant Current Board Product Description: This module power output is affect by the module itself-capacity and...

    ₱165.00
    ₱165.00
    ₱165.00
You might like
🎁💝 Price Drop Alert! ₱50 Off ESUN Filaments & Resins Until Sept 15!!