SKU:MLE04697
DFRobot Gravity: Digital Weight Sensor | SEN0160
Share
About the Product
This Electronic Arduino Weight Sensor is able to detect 1kg weight. It based on HX711, a precision 24-bit analog-to-digital converter designed for weight scale and industrial control applications to interface directly with a bridge sensor.
This Electronic arduino weight sensor lowers the cost of the electronic scale, and at the same time improving the performance and reliability. The interface of this sensor uses DFRobot Gravity Interface. The output adopts compact terminal that makes the sensor easier to connect. It's the best choose for electronic enthusiast to do some tiny home scale.
Sensor connection Note:Red Line -- E+
Black Line -- E-
White Line -- S-
Green Line -- S+
SPECIFICATION
24-Bit Analog-to-Digital Converter for Weight Scales (HX711)
Two selectable differential input channels
On-chip active low noise PGA with selectable gain of 32,64 and 128
On-chip power supply regulator for load-cell and ADC analog power supply
On-chip oscillator requiring no external component with optional external crystal
On-chip power-on-rest
Simple digital control and serial interface: pin-driven controls, no programming needed
Selectable 10SPS or 80SPS output data rate
Simultaneous 50 and 60Hz supply rejection
Supply Voltage: 2.6V~5.5V
Current: <1.6mA
Working temperature: -40~85°C
16 pin SOP-16 package
Weight Sensor Module
Range: 1kg
Excitation voltage: 5-15 V
Output sensitivity: 1.0±0.15mV/V
Synthetical error: 1 per thousand cent of full scale
Zero shift: 0.05/0.03 (30min)%F.S
Zero temperature shift: 0.05/0.03 %F.S/10°C
Zero output: ±0.1mV/V
Input impedance: 1055±15 Ω
Output impedance: 1000±5 Ω
Overload capability: 200 %F.S
Output: Analog output
Size: 33mm*38mm
SHIPPING LIST
Weight sensor module x1
Weight sensor x1
Sensor cable x2