-
Dfrobot gravity: analog soil moisture sensor for arduino | sen0114
Analog Soil Moisture Sensor This Analog Soil Moisture Sensor can read the amount of moisture present in the soil surrounding...
₱265.00₱265.00₱265.00 -
19% offCreality black enclosure cover for resin printer (halot one series, halot sky, halot mage, ld-006)
Creality Black Enclosure Cover for Resin Printer (Halot One Series, Halot Sky, Halot Mage, LD-006) Features: Filter Odor Dust and...
₱5,000.00 ₱6,249.00₱5,000.00₱5,000.00 ₱6,249.00 -
19% offCreality k1 mainboard kit
Upgrade your 3D printing experience with the Creality K1 Mainboard Kit. This kit brings a myriad of enhancements to your...
₱5,000.00 ₱6,249.00₱5,000.00₱5,000.00 ₱6,249.00 -
Sparkfun triple axis digital accelerometer breakout - adxl313 (qwiic) | sen-17241
The SparkFun ADXL313 Breakout is a low-power, high-resolution (up to 13-bits) 3-axis accelerometer for measuring up to ±4g. This breakout...
₱1,249.00₱1,249.00₱1,249.00 -
20% off2 channel pwm pulse frequency
Features: Two independent PWM generators can set the frequency, duty cycle; The wide frequency range, high accuracy; Can serial communication....
₱135.00 ₱169.00₱135.00₱135.00 ₱169.00 -
Rs pro red 6 mm² tri-rated cable, 10 awg, 84/0.3mm, 100m, pvc insulation
Product Details RS Pro Tri Rated Cable From RS Pro a high quality Tri Rated cable with a 1 m...
₱13,500.00₱13,500.00₱13,500.00 -
Rs pro black 1.5 mm² hook up wire, 15 awg, 30/0.25 mm, 100m, pvc insulation
Product Details 2491X A plain copper stranded conductor covered by a PVC insulated sheath. These flexible wires are intended for...
₱6,500.00₱6,500.00₱6,500.00 -
229-560 | rs pro 29mm x 29mm self adhesive natural cable tie mount, 5mm max. cable tie width
Product Details Self-Adhesive Cable Tie Mount ?RS Stock No.:229-560 This adhesive cable tie base is designed as an anchor point...
₱40.00₱40.00₱40.00 -
Water flow sensor (sea) of05zat g3/8 dn10 milk gasoline oil diesel flow rate sensor control meter
G1/2" Oil Flow Meter Flowmeter Oval Gear Flow Sensor OF05ZAT Product Description: Product item no. : OF05ZAT Material : Plastic...
₱1,250.00₱1,250.00₱1,250.00 -
Creality synchronous belt kit for k1 / k1 max 1800mm | 4001080072
Compatible: CR-5 Pro H(CT-380)_K1_K1 MaxSynchronous Belt Kit_1.8M
₱499.00₱499.00₱499.00 -
Biqu panda door pc upgrade panel for bambu lab p1/x1 3d printer - yellow and black
Specifications: Material: Polycarbonate Color Options: Dark Crystal, Citrus Splash Compatibility: For Bambu Lab P1/X1 series 3D Printers What’s in the...
₱1,250.00₱1,250.00₱1,250.00 -
Creality cr m4 motherboard
Description: The Creality CR-M4 Motherboard is a custom-designed, integrated 32-bit mainboard developed specifically for the CR-M4 3D printer. It combines...
₱4,499.00₱4,499.00₱4,499.00 -
Dfrobot gravity: as7341 11-channel visible light sensor | sen0364
FEATURES 8 optical channels covering the visible spectral range 50Hz and 60Hz ambient light flicker detection 6 independent 16-bit ADC...
₱1,299.00₱1,299.00₱1,299.00 -
Adafruit cap1188 - 8-key capacitive touch sensor breakout - i2c or spi | 1602
CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI Add lots of touch sensors to your next microcontroller...
₱550.00₱550.00₱550.00 -
Adafruit apds9960 proximity, light, rgb, and gesture sensor | code: 3595
Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor This breakout is chock full o' sensors! Add basic gesture sensing, RGB...
₱600.00₱600.00₱600.00 -
Atlas scientific orp kit | kit-104o
Atlas Scientific ORP Kit Specification: • 1 EZO™ ORP Circuit • 1 Platinum rod ORP Probe • 1 125ml (4oz)...
₱12,000.00₱12,000.00₱12,000.00 -
Sparkfun gps breakout – chip antenna, sam-m8q (qwiic) | gps-15210
SparkFun GPS Breakout - Chip Antenna, SAM-M8Q (Qwiic) Description: The SparkFun SAM-M8Q GPS Breakout is a high quality, GPS board...
₱2,500.00₱2,500.00₱2,500.00 -
Pololu g2 high-power motor driver 18v25 | 2994
Pololu G2 High-Power Motor Driver 18v25 The Pololu G2 high-power motor driver is a discrete MOSFET H-bridge designed to drive...
₱2,000.00₱2,000.00₱2,000.00 -
M5stack mini infrared distance unit
Description: IR Unit is an infrared photodiode unit that integrates both an infrared transmitter and receiver. It is designed to be...
₱300.00₱300.00₱300.00 -
M5stack battery module for arduino esp32 core development kit
Description: BATTERY: The Battery extension module is a 750mAh battery ADD-ON. Would you like to make a demo or prototype...
₱550.00₱550.00₱550.00 -
M5stack 1 to 3 hub unit
Description: HUB is a unit that is used in order to expand the GROVE ports over the M5Stack device. For...
₱250.00₱250.00₱250.00 -
M5stack gps module with internal & external antenna
Description: GPS is build with u-blox M8 NEO-M8N module with an integrated built in active antenna. The NEO-M8 series provides...
₱2,500.00₱2,500.00₱2,500.00 -
2% offM5stack roverc pro (w/o m5stickc)
Description: RoverC-Pro is a programmable Mecanum wheel omnidirectional mobile robot base. Compatible with M5StickC/M5StickC PLUS, it can be initialised by...
₱4,400.00 ₱4,499.75₱4,400.00₱4,400.00 ₱4,499.75 -
M5stack watering unit with moisture sensor and pump | u101
Watering is a capacitive soil moisture detection and adjustment unit. The product integrates water pump and measuring plates for soil...
₱800.00₱800.00₱800.00
